The ICT Weather Hub is a fully featured weather station based on the ICT Universal Telemetry Hub, designed to be pole-mounted or tripod-mounted, ideal for use with the ATMOS 41 or a range of SDI-12 Sensors.
Standard Configuration includes a set of sensors for: Air Temperature, Relative Humidity, Barometric Pressure, Wind Speed, Wind Direction, Rainfall, and Solar Radiation or PAR.
|Enclosure:||IP67 rated, extruded aluminium – hard anodised body. Moulded UV, moisture and impact resistant endcaps. All external fasteners 316 stainless steel.|
|Service Hatch:||Sealed service hatch provides access to switches, SD and SIM cards and non-waterproof connections.|
|Solar Panel:||20W. Charge rate automatically adjusts depending on available sunlight.|
|Data Storage:||FAT32, CSV files saved on SDHC cards of up to 32GB capacity.|
|USB:||USB 2.0 Full Speed (12Mbps).|
|Auxillary Serial Ports:||1x RS485 port, 1x I2C/SPI port.|
|Battery:||4.9Ah wide temperature range, lithium-ion.|
|Power Outputs:||Dual switched, 4.2V battery voltage at up to 4 Amps OR up to 15V at up to 1 Amp.|
|External Connections:||5 flexible external IP67 connectors (N-type for wireless or multi-way gold plated for signalling and power). Can be used for communications, sensing, control and/or power output.|
The Telemetry Hub is housed in a rugged IP67 enclosure designed for direct field deployment. Complete communications, control and instrumentation or media solutions are packaged in a single unit. Powered by an internal Lithium Ion battery, with a built in solar charge regulator. The Telemetry Hub has a multiprocessor architecture, where the main CPU is a 32 bit, three stage, pipelined ARM Cortex M3 processor with a nested vectored interrupt controller and a high performance DMA controller.
The Telemetry Hub is designed to conserve power when not active and manage activity based on battery charge level. The Telemetry Hub can be fitted with a smart phone sized graphical LCD touchscreen to provide custom user interfaces. It is designed to be easy to open up and service at a basic level, (eg: changing a battery, SD or SIM card or replacing a circuit board.) External connections are made to the Telemetry Hub via IP67 waterproof connectors.